Cleaning the Drive Chain and around it

The Drive chain and whole around area was full grease spots and dirt. So I decided to clean all the area and to lube the chain.

After removing the Heel Plates

The plate itself

Removed chain guard

And after the washing

All screws were lubricated by

Then I ride the bike for 10 minutes and then lubricated the drive chain by this

The result

Additionally the bike tank protector was placed

All this with my cool assistant

Timing hole cap gasket replacement - 27781 km

About two weeks ago I noticed small greasy spot around the timing hole cover (no leakage were detected ).

I cleared the greasy spot and rechecked it again every few days. The spot appears again after a week.

So I went to a Official Honda Garage.

picture 1: Clear Hole

The replaced part is

91301-ML7-003

O-RING (48.1X3.6)

picture 2:

The replaced O-Ring shown as number 4 in a picture above.

--------------------------------------------------------------

Service by Honda HaShalom filial

Total work time - 30 minutes

Total cost - 62NIS

Broken front fairing

Originally the bike was offered with broken front left fairing and dashboard panel at 1.7.2010.

According to the seller (Official Honda IL dealer ) the bike felt down when they tried to move it.

During the inspection it was approved by a Alon Niv (no crashes were found).